BMW X2 F39(2018+)
BMW X2 F39(2018+)
Checkbox acoustic pedestrian protection
Enable/disable the checkbox in the settings in the iDrive system to turn the acoustic pedestrian protection on or off.
Values:
- Active
- Not active
Acoustical lock/unlock confirmation
Enable/disable the acoustical confirmation when the car is locked/unlocked.
Values:
- Active
- Not active
Checkbox acoustical lock confirmation
Enable/disable the checkbox in the settings for doors/keys in the iDrive system to enable/disable the acoustical lock confirmation. If the checkbox in the iDrive system does not allow selection, please check if “Acoustical lock/unlock confirmation” in the “Roof Function Center” control unit is set to “Active“ also. Please note that the car has to be equipped with an alarm system.
Values:
- Active
- Not active
Confirmation sound duration
The duration of the confirmation sound that is played when locking/unlocking the car.
Values:
- Short
- Normal
- Long
- Very long
Confirmation sound frequency
Values:
- Low
- Normal
- High
Confirmation sound volume
The volume of the confirmation sound that is played when locking/unlocking the car.
Values:
- Low
- Normal
- High
- Very high
Active Sound Design deactivation
Deactivate the Active Sound Design. Use a backup to revert this coding once it has been applied.
Values:
- Deactivated
Air circulation setting memory
Enable/disable storing of the air circulation setting. If this function is active, the last used air circulation setting will be restored during the next start of the car.
Values:
- Active
- Not active
Air conditioning on in AUTO mode
Enable/disable the automatic activation of the air conditioning when the AUTO mode is turned on.
Values:
- Active
- Not active
Air conditioning setting memory
Enable/disable storing of the air conditioning setting. If this function is active, the last used air conditioning setting will be restored during the next start of the car.
Values:
- Active
- Not active
Automatic Air Recirculation
Enable/disable the Automatic Air Recirculation function.
Values:
- Active
- Not active
Display color change
Enable/disable the color change of the display from white to orange.
Values:
- Active
- Not active
Alarm sound
The alarm sound that is played when the alarm is triggered.
Values:
- Alarm sound Europe
- Alarm sound Great Britain
- Alarm sound USA
Interior motion detection
Enable/disable the interior motion detection of the alarm system. Please note that this function requires the car to be equipped with an alarm system.
Values:
- Active
- Not active
OBD alarm
The alarm is triggered when the vehicle is locked and communication via the OBD port is detected. Please note that this function requires the car to be equipped with an alarm system.
Values:
- Active
- Not active
Ambient lighting brightness decoupling from instrument cluster
Enable/disable the decoupling of the brightness of the ambient lighting from the brightness of the instrument cluster.
Values:
- Active
- Not active
Angel Eyes brightness low beam
The brightness of the Angel Eyes with low beam.
Values:
- 10%
- 20%
- 30%
- 40%
- 50%
- 60%
- 70%
- 80%
- 90%
- 100%
Angel Eyes brightness parking lights
The brightness of the Angel Eyes with parking lights.
Values:
- 10%
- 20%
- 30%
- 40%
- 50%
- 60%
- 70%
- 80%
- 90%
- 100%
Acoustic signal when reverse gear is engaged
Enable/disable the acoustic signal that sounds when the reverse gear is engaged.
Values:
- Active
- Not active
Bluetooth audio streaming
This coding enables wireless audio streaming via Bluetooth. Use a backup to revert this coding once it has been applied.
Values:
- Active
Maximum volume at start-up
The maximum volume that is saved when the iDrive system is shut off and restored automatically on the next start-up.
Values:
- 10%
- 20%
- 25%
- 30%
- 40%
- 50%
Ringtone
The ringtone that is used in case of an incoming call.
Values:
- BMW i ringtone
- BMW ringtone
- Mini ringtone
- Smartphone ringtone
Shut off iDrive system when driver door is opened
Enable/disable the automatic shut-off of the iDrive system when the driver door is opened.
Values:
- Active
- Not active
Warning chime
The warning chime that sounds when a warning is displayed in the car.
Values:
- BMW i warning chime
- BMW warning chime
- Mini warning chime
- Rolls Royce warning chime
Auto Start Stop function in ECO mode
Enable/disable the automatic activation of the Auto Start Stop function in ECO PRO driving mode.
Values:
- Active
- Not active
Auto Start Stop function memory
Save the last used Auto Start Stop function setting for the next start of the car. Please note that the Auto Start Stop function is automatically activated again in ECO PRO driving mode.
Values:
- Active
- Not active
Auto Start Stop function off by default
Set the Auto Start Stop function to off by default when the car is started. Please note that the Auto Start Stop function is automatically activated again in ECO PRO driving mode.
Values:
- Active
- Not active
Battery type
The type and capacity of the 12 V battery. Please note that this value must only be modified if the battery in the car has been replaced. After coding, the battery replacement has to be registered using “BimmerLink” additionally.
Values:
- 20 Ah
- 40 Ah
- 40 Ah AGM
- 46 Ah
- 55 Ah AGM
- 60 Ah AGM
- 60 Ah EFB
- 70 Ah
- 70 Ah AGM
- 70 Ah EFB
- 80 Ah
- 80 Ah AGM
- 80 Ah EFB
- 90 Ah
- 90 Ah AGM
- 105 Ah AGM
Brake Force Display activation brake force
The brake deceleration at which the Brake Force Display is activated.
Values:
- Weak braking (5 m/s²)
- Medium braking (7 m/s²)
- Hard braking (8 m/s²)
Brake Force Display activation speed
The speed at which the Brake Force Display is activated.
Values:
- 5 km/h
- 10 km/h
- 20 km/h
- 30 km/h
- 40 km/h
- 50 km/h
CarPlay fullscreen mode
Show CarPlay in full screen mode. Important: This coding only works with the iDrive software versions “NBTevo_X“ and “NBTevo_Y“. You can easily check for yourself which software version is currently installed in your vehicle. To do this, navigate to the version info in the iDrive system in your vehicle (Navigation > Settings > Position and version > Version information). If you can see “NBTevo_X“ or “NBTevo_X“ here, then full screen mode will work. If you see “NBTevo_N“, “NBTevo_O“, “NBTevo_P“, “NBTevo_Q“, “NBTevo_R“, “NBTevo_S“, “NBTevo_U“, “NBTEvo_V“ or “NBTEvo_W“ instead, then full screen mode can not be enabled with BimmerCode unfortunately.
Values:
- Active
- Not active
Convenient closing
Enable/disable the convenient closing. During convenient closing the windows are closed and the power folding mirrors are folded in. To trigger convenient closing the lock button on the remote control has to be pressed and held. Please note that this option does not work for convertibles.
Values:
- Active
- Not active
Convenient closing delay
The delay for the convenient closing before the windows are closed.
Values:
- 0.5 seconds
- 1 second
- 1.5 seconds
- No delay
Convenient closing delay front windows
The delay at which the front windows are closed during convenient closing.
Values:
- 0.5 seconds
- 1 second
- 1.5 seconds
- No delay
Convenient closing delay sunroof
The delay as of with the sunroof is closed during convenient closing.
Values:
- 0.5 seconds
- 1 second
- 1.5 seconds
- 3.5 seconds
- No delay
Convenient closing with Comfort Access
Enable/disable the convenient closing with the Comfort Access. For convenient closing with the Comfort Access the door handle has to be touched and held at the ribbed surface. Please note that this option does not work for convertibles.
Values:
- Active
- Not active
Convenient closing with remote control
Enable/disable the convenient closing with the remote control. For convenient closing with the remote control, the lock button has to be pressed and held. Please note that this option does not work for convertibles.
Values:
- Active
- Not active
Convenient opening
Enable/disable the convenient opening. During convenient opening the windows are opened and the power folding mirrors are unfolded. For a convenient opening the unlock button on the remote control has to be pressed and held. When using Comfort Access, the door handle has to be gripped and held.
Values:
- Active
- Not active
Convenient opening delay
The delay for the convenient opening before the windows are opened.
Values:
- 0.5 seconds
- 1 second
- 1.5 seconds
- 2 seconds
- 2.5 seconds
Convenient opening delay rear windows
The delay at which the rear windows are opened during convenient opening.
Values:
- 0.5 seconds
- 1 second
- 1.5 seconds
- No delay
Convenient opening delay sunroof
The delay as of with the sunroof is opened during convenient opening.
Values:
- 0.5 seconds
- 1 second
- 1.5 seconds
- 3.5 seconds
- No delay
Convenient opening with remote control
Enable/disable the convenient opening with the remote control. For convenient opening with the remote control, the unlock button has to be pressed and held.
Values:
- Active
- Not active
Checkbox daytime running light
Enable/disable the checkbox in the lighting settings in the iDrive system to turn the daytime running light on or off.
Values:
- Active
- Not active
Daytime running light mode
The daytime running light mode.
Values:
- Active
- Active also with parking lights
- Not active
Daytime running light tail lights inner part
Values:
- Active
- Not active
Daytime running light tail lights outer part
Values:
- Active
- Not active
Display full text messages
Enable the full display of text messages while driving. Use a backup to revert this coding once it has been applied.
Values:
- Active
Rear view camera zoom
Enable/disable the rear view camera zoom to the trailer hitch.
Values:
- Active
- Not active
Service history
Enable/disable the service history in the iDrive system.
Values:
- Active
- Not active
Start animation
The animation that is displayed when the iDrive system is started. Please note that the animation is not visible every time you start the car, but only under certain circumstances.
Values:
- ALPINA
- BMW 1
- BMW 2
- BMW i
- Christmas
- Connected Drive 1
- Connected Drive 2
- M variant 1
- MINI variant 1
- Rolls Royce
Start animation
The animation that is displayed when the iDrive system is started. Please note that the animation is not visible every time you start the car, but only under certain circumstances.
Values:
- ALPINA
- BMW i
- Connected Drive
- M variant 1
- M variant 2
- MINI John Cooper Works
- MINI variant 1
- MINI variant 2
- Rolls Royce
Start screen
The type of start screen that is displayed when the head unit starts up.
Values:
- Animation
- Welcome screen
Tire pressure control
The displayed values of the tire pressure control in the iDrive system. Please note that the car has to be equipped with the required sensors to make this work.
Values:
- Display pressure only
- Display temperature and pressure
- Not active
Volume popup
Enable/disable the volume popup that is displayed when the volume is changed.
Values:
- Active
- Not active
Average values reset
The average speed and consumption is reset after the set time automatically.
Values:
- After 4 hours
- After 8 hours
- After every ride
- Never
Date in board computer
Enable/disable the display of the date in the board computer. Please toggle the displayed information in the board computer with the button in the turn signal lever until the specific display appears.
Values:
- Active
- Not active
Digital speed in board computer
Enable/disable the display of the digital speed in the board computer. Please toggle the displayed information in the board computer with the button in the turn signal lever until the specific display appears.
Values:
- Active
- Not active
Empty menu item in board computer
Enable/disable the empty menu item in the board computer.
Values:
- Active
- Not active
Fuel consumption display maximum value
The maximum value of the fuel consumption display.
Values:
- 20 l/100km
- 30 l/100km
Horn signal when locking the car with engine running
Enable/disable the horn signal that sounds when locking the car with the engine running.
Values:
- Active
- Not active
Time until automatic lock
The car is locked automatically again if it has been unlocked and no door has been opened within the set time.
Values:
- 10 seconds
- 30 seconds
- 1 minute
- 2 minutes
- 5 minutes
- 10 minutes
Unlock doors automatically
Enable/disable the automatic unlock of the doors when the ignition is turned off.
Values:
- Active
- Not active
Window lifter interruption when opening a door
Enable/disable the window lifter interruption when a door is opened.
Values:
- Active
- Not active
Default driving mode
The default driving mode on start-up.
Values:
- Comfort
- ECO PRO
- ECO PRO+
- Sport
Driving mode memory
Enable the driving mode memory. The last used driving mode is stored when the car is turned off and restored on the next start-up. Use a backup to revert this coding once it has been applied.
Values:
- 15 minutes
- Always
- Not active
Easy entry protection area
The protection area limits the rearward travel of the seat when easy entry is activated.
Values:
- 0 mm
- 10 mm
- 20 mm
- 30 mm
- 40 mm
- 50 mm
- 60 mm
- 70 mm
- 80 mm
- 90 mm
- 100 mm
Easy entry seat movement
In order to make it easier to get in the car, the seat is automatically moved back when unlocked and then returns to its original position when the ignition is switched on. Please note that the car has to be equipped with electrically adjustable seats with memory function.
Values:
- Active
Easy entry seat travel
The seat travel of the seat when easy entry is activated.
Values:
- 10 mm
- 20 mm
- 30 mm
- 40 mm
- 50 mm
- 60 mm
- 70 mm
- 80 mm
- 90 mm
- 100 mm
Low fuel warning 1
The remaining range at which the permanent low fuel warning is displayed.
Values:
- 10 kilometers
- 10 miles
- 20 kilometers
- 20 miles
- 30 kilometers
- 30 miles
- 40 kilometers
- 50 kilometers
- Not active
HUD music lists
Enable/disable music lists in the HUD.
Values:
- Active
- Not active
Headlight cleaning blocking time
The blocking time between headlight cleaning activations.
Values:
- 1 minute
- 2 minutes
- 3 minutes
- 4 minutes
- 5 minutes
- 6 minutes
- 7 minutes
- 8 minutes
- 9 minutes
- 10 minutes
Headlight cleaning pause between injection pulses
The pause between the injection pulses of the headlight cleaning system.
Values:
- 200 ms
- 400 ms
- 600 ms
- 800 ms
- 1000 ms
- 1200 ms
- 1400 ms
- 1600 ms
- 1800 ms
- 2000 ms
Headlight cleaning system deactivation speed threshold
The deactivation speed threshold at which the headlight cleaning system is deactivated.
Values:
- 10 km/h
- 20 km/h
- 30 km/h
- 40 km/h
- 50 km/h
- 60 km/h
- 70 km/h
- 80 km/h
- 90 km/h
- 100 km/h
- 110 km/h
- 120 km/h
- 130 km/h
- 140 km/h
- 150 km/h
Headlight washers
Activate/deactivate the headlight washers.
Values:
- Active
- Not active
Number of washing operations for headlight cleaning
The number of washing operations at which the headlight cleaning is turned on.
Values:
- 1 operation
- 5 operations
- 10 operations
Number of water injection pulses during headlight cleaning
The number of water injection pulses during headlight cleaning.
Values:
- 1 time
- 2 times
- 3 times
Water injection duration for headlight cleaning
The duration of the water injection pulses of the headlight cleaning system.
Values:
- 200 ms
- 400 ms
- 600 ms
- 800 ms
- 1000 ms
- 1200 ms
- 1400 ms
- 1600 ms
- 1800 ms
- 2000 ms
LED conversion Brake Force Display
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion bi-xenon
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion brake light
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion center brake light
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion daytime running lights
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion fog lights
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion front turn signal
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion high beam
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion inner tail lights
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion license plate light
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion low beam
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion outer tail lights
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion position lights
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion rear fog light
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion rear turn signals
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion reversing light
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion side turn signal
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
LED conversion sidemarkers
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Door handle lights when reverse gear is engaged
Enable/disable the automatic activation of the lights in the door handles when the reverse gear is engaged.
Values:
- Active
- Not active
Fog lights off with high beam
Enable/disable the automatic switch-off of the fog lights when the high beam is turned on.
Values:
- Active
- Not active
Fog lights with parking lights
Allows the fog lights to be turned on with parking lights.
Values:
- Active
- Not active
Hazard warning signal after emergency braking
The hazard warning signal is activated automatically after an emergency braking.
Values:
- Active
- Not active
Rain-light-sensor sensitivity
The sensitivity of the rain-light-sensor that affects the automatic wiper and light activation.
Values:
- Default
- Insensitive
- Normal
- Sensititve
- Very sensitive
Automatic mirror tilt
Enable/disable the automatic mirror tilt for the right mirror, when the reverse gear is engaged. Please note that your car has to be equipped with power folding mirrors. Make sure the button in the door for selecting the mirror is set to the driver side also.
Values:
- Active
- Not active
Automatic mirror tilt value
The tilt value of the right mirror, when the reverse gear is engaged.
Values:
- 10%
- 20%
- 30%
- 40%
- 50%
- 60%
- 70%
- 80%
- 90%
- 100%
Fold mirrors with convenient closing
Enable/disable the folding of the mirrors when using convenient closing. Please note that your car has to be equipped with power folding mirrors and that this option does not work for convertibles.
Values:
- Active
- Not active
Fold/unfold mirrors automatically
The mirrors are folded automatically when the car is locked with the remote control or Comfort Access and unfolded when the car is unlocked. Please note that your car has to be equipped with power folding mirrors and that this option does not work for convertibles. Use a backup to revert this coding once it has been applied.
Values:
- Active
Mirror folding speed threshold
The maximum speed at which the mirrors can be folded.
Values:
- 5 km/h
- 10 km/h
- 20 km/h
- 30 km/h
- 40 km/h
- 50 km/h
Mirror unfolding speed threshold
The speed at which the mirrors are unfolded automatically.
Values:
- 5 km/h
- 10 km/h
- 20 km/h
- 30 km/h
- 40 km/h
- 50 km/h
Unfold mirrors with convenient opening
Enable/disable the unfolding of the mirrors when using convenient opening.
Values:
- Active
- Not active
Activate PDC when rolling backwards
Enable/disable the automatic activation of the PDC when the car starts rolling backwards.
Values:
- Active
- Not active
PDC distance switch-off threshold
The driven distance after the PDC is turned off automatically.
Values:
- 10 m
- 20 m
- 30 m
- 40 m
- 50 m
- 100 m
- 150 m
- 200 m
- 250 m
PDC speed switch-off threshold
The speed at which the PDC is turned off automatically.
Values:
- 5 km/h
- 10 km/h
- 15 km/h
- 20 km/h
- 30 km/h
- 36 km/h
- 40 km/h
- 50 km/h
Rear view camera distance switch-off threshold
The driven distance after the rear view camera is turned off automatically.
Values:
- 10 m
- 20 m
- 30 m
- 40 m
- 50 m
- 100 m
- 150 m
- 200 m
- 250 m
Rear view camera speed switch-off threshold
The speed at which the rear view camera is turned off automatically.
Values:
- 5 km/h
- 10 km/h
- 15 km/h
- 20 km/h
- 30 km/h
- 36 km/h
- 40 km/h
- 50 km/h
HiFi loudspeaker system
Coding for a retrofitted HiFi loudspeaker system. Use a backup to revert this coding once it has been applied.
Values:
- Active
Front backrests temperature level 1
The temperature of the front backrests for seat heating level 1.
Values:
- 30 °C
- 31 °C
- 32 °C
- 33 °C
- 34 °C
- 35 °C
Front backrests temperature level 2
The temperature of the front backrests for seat heating level 2.
Values:
- 36 °C
- 37 °C
- 38 °C
- 39 °C
- 40 °C
- 41 °C
Front backrests temperature level 3
The temperature of the front backrests for seat heating level 3.
Values:
- 42 °C
- 43 °C
- 44 °C
- 45 °C
- 46 °C
- 47 °C
Front seats temperature level 1
The temperature of the front seats for seat heating level 1.
Values:
- 30 °C
- 31 °C
- 32 °C
- 33 °C
- 34 °C
Front seats temperature level 2
The temperature of the front seats for seat heating level 2.
Values:
- 35 °C
- 36 °C
- 37 °C
- 38 °C
- 39 °C
- 40 °C
Front seats temperature level 3
The temperature of the front seats for seat heating level 3.
Values:
- 41 °C
- 42 °C
- 43 °C
- 44 °C
- 45 °C
- 46 °C
Rear backrests temperature level 1
The temperature of the rear backrests for seat heating level 1.
Values:
- 30 °C
- 31 °C
- 32 °C
- 33 °C
- 34 °C
- 35 °C
Rear backrests temperature level 2
The temperature of the rear backrests for seat heating level 2.
Values:
- 36 °C
- 37 °C
- 38 °C
- 39 °C
- 40 °C
- 41 °C
Rear backrests temperature level 3
The temperature of the rear backrests for seat heating level 3.
Values:
- 42 °C
- 43 °C
- 44 °C
- 45 °C
- 46 °C
- 47 °C
Rear seats temperature level 1
The temperature of the rear seats for seat heating level 1.
Values:
- 30 °C
- 31 °C
- 32 °C
- 33 °C
- 34 °C
Rear seats temperature level 2
The temperature of the rear seats for seat heating level 2.
Values:
- 35 °C
- 36 °C
- 37 °C
- 38 °C
- 39 °C
- 40 °C
Rear seats temperature level 3
The temperature of the rear seats for seat heating level 3.
Values:
- 41 °C
- 42 °C
- 43 °C
- 44 °C
- 45 °C
- 46 °C
Seat heating/cooling setting memory
The memory duration of the seat heating/cooling settings.
Values:
- 15 minutes
- 24 hours
- Do not save
- Unlimited
Initial seat belt reminder after start
Activate/deactivate the initial acoustic seat belt reminder after the car is started.
Values:
- Active
- Not active
Seat belt indicator driver seat
Activate/deactivate the seat belt indicator in the instrument cluster for the driver seat.
Values:
- Active
- Not active
Seat belt indicator passenger seat
Activate/deactivate the seat belt indicator in the instrument cluster for the passenger seat.
Values:
- Active
- Not active
Seat belt reminder distance
Driven distance at which th seat belt reminder is activated.
Values:
- 50 m
- 100 m
- 200 m
- 500 m
Seat belt reminder driver seat
Activate/deactivate the acoustic and visual seat belt reminder for the driver seat.
Values:
- Active
- Not active
Seat belt reminder duration
Duration at which the seat belt reminder stays active.
Values:
- 5 seconds
- 10 seconds
- 15 seconds
- 20 seconds
- 30 seconds
- 45 seconds
- 60 seconds
- 90 seconds
Seat belt reminder passenger seat
Activate/deactivate the acoustic and visual seat belt reminder for the passenger seat.
Values:
- Active
- Not active
Seat belt reminder speed
Speed at which th seat belt reminder is activated.
Values:
- 8 km/h
- 10 km/h
- 20 km/h
- 30 km/h
- 40 km/h
- 50 km/h
Sport displays
Enable/disable the Sport displays in the iDrive system. Please note that in some cars the engine control unit does not transmit the required values to the headunit and in this case the Sport displays will be displayed but remain functionless.
Values:
- Active
- Not active
Sport displays color
The color of the Sport displays in the iDrive system.
Values:
- Orange
- Red
Boot lid opening delay
The delay when opening the boot lid with the remote control. This value can be increased to prevent accidental openings of the boot lid.
Values:
- 0.5 seconds
- 0.7 seconds
- 1 second
- 5 seconds
- 10 seconds
- No delay
Close tailgate with button in the interior without long press
Enable/disable the closing of the tailgate with the button in the interior without a long press.
Values:
- Active
- Not active
Close tailgate with the remote control without long press
Enable/disable closing the tailgate without a long press of the button on the remote control.
Values:
- Active
- Not active
Open tailgate after unlock only
The tailgate can only be opened after unlocking the car with the remote control. Please note that “Tailgate“ has to be selected for the tailgate button in the settings in the iDrive system in the car.
Values:
- Active
- Not active
Tailgate function remote control
The tailgate function that is triggered when the button on the remote is pressed.
Values:
- Open
- Open and close
Tailgate function when pulling the button in the interior
The tailgate function that is triggered when the button in the interior is pulled up.
Values:
- Close
- Deactivated
Tailgate function when pushing the button in the interior
The tailgate function that is triggered when the button in the interior is pushed down.
Values:
- Deactivated
- Open
- Open and close
Warning sound when closing the tailgate with remote control
A warning signal sounds when the tailgate is closed with the remote control.
Values:
- Active
- Not active
Warning sound when closing the tailgate with the button in the interior
A warning signal sounds when the tailgate is closed with the button in the interior.
Values:
- Active
- Not active
Turn signals flashing on locking
Number of turn signal flashes when locking the car.
Values:
- 1 time
- 2 times
- 3 times
- Off
Turn signals flashing on unlocking
Number of turn signal flashes when unlocking the car.
Values:
- 1 time
- 2 times
- 3 times
- Off
Additional video codecs and formats
Activate additional video codecs and formats (Ogg, Xvid and VCD). Use a backup to revert this coding once it has been applied.
Values:
- Active
Video in motion
Activate video in motion. Use a backup to revert this coding once it has been applied.
Values:
- Active
Video in motion
Enable video in motion. Please note the instructions displayed after coding.
Values:
- Active
- Not active
Video via USB
Enable video playback from USB storage media. Use a backup to revert this coding once it has been applied.
Values:
- Active
Camera warning
Disable the warning that is displayed when using one of the cameras. Use a backup to revert this coding once it has been applied.
Values:
- Not active
Night vision warning
Disable the warning that is displayed when using the night vision camera. Use a backup to revert this coding once it has been applied.
Values:
- Not active
Warning at start-up
Disable the warning that is displayed when the iDrive system is started. Use a backup to revert this coding once it has been applied.
Values:
- Not active
Welcome Light activation
The position of the light switch at which the Welcome Light is activated.
Values:
- Light switch on auto
- Light switch on auto or 2
- Not active
Welcome Light in darkness only
Enable/disable the activation of the Welcome light in darkness only.
Values:
- Active
- Not active
Welcome Light lighting duration
The lighting duration of the Welcome Light.
Values:
- 5 seconds
- 10 seconds
- 15 seconds
- 20 seconds
- 30 seconds
- 45 seconds
- 60 seconds
Welcome Lights brake lights
The brake lights are turned on with the Welcome Lights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights brightness
The brightness of the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.
Values:
- 10%
- 20%
- 30%
- 40%
- 50%
- 60%
- 70%
- 80%
- 90%
- 100%
Welcome Lights central turn signals
The central turn signals are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights daytime running light
The daytime running light is turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights design lights
The design lights are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights fog lights
The fog lights are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights front turn signals
The front turn signals are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights high beam
The high beam is turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights inner rear parking lights
The inner rear parking lights are turned on with the Welcome Lights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights license plate lights
The license plate lights are turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights low beam
The low beam is turned on with the Welcome Lights. Please note that this option only works for cars equipped with halogen or xenon headlights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights outer rear parking lights
The outer rear parking lights are turned on with the Welcome Lights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights parking lights front
The front parking lights are turned on with the Welcome Lights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights rear fog light left
The left rear fog light is turned on with the Welcome Lights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights rear fog light right
The right rear fog light is turned on with the Welcome Lights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights reversing light left
The left reversing light is turned on with the Welcome Lights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights reversing light right
The right reversing light is turned on with the Welcome Lights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights third brake light.
The third brake light is turned on with the Welcome Lights.
Values:
- Hard on
- Off
- Soft on
Welcome Lights turn signals front
The front turn signals are turned on with the Welcome Lights.
Values:
- Hard on
- Off
- Soft on
Complete wiper cycle
Enable/disable the completion of the wiper cycle when the car is turned off.
Values:
- Active
- Not active
Wipe cycles after front washing
The number of wipe cycles after front washing
Values:
- 1 time
- 2 times
- 3 times
- 4 times
- 5 times
Wipe cycles after rear washing
The number of wipe cycles after rear washing.
Values:
- 1 time
- 2 times
- 3 times
- 4 times
- 5 times
Wiper level switch back when stationary
Enable/disable the automatic switch back of the wiper level when the car becomes stationary.
Values:
- Active
- Not active
